ATEX Basic Information
ATEX means ‘Atmosphères’ explosives. atex 95 and 137 relate to the establishment of Articles 95 and 137 of the EC Convention on the improvement of the working environment respectively.
The revised Working Conditions Decree sets out what obligations employers must fulfil if work is carried out in explosive atmospheres.
The obligations are as follows:
Firstly, the employer must draw up a written document on explosion hazards based on a risk assessment, including the identification and assessment of explosion hazards.
Secondly, the employer must divide the work area in an explosive atmosphere into different hazard zones and mark these zones with hazard symbols. The new hazard signs are triangular in shape and contain the letters EX. Employers have until 1 July 2006 to obtain the new hazard signs.
Thirdly, the employer takes measures to prevent explosive atmospheres from occurring as far as possible. If this is not entirely possible, the atmosphere must be prevented from catching fire, for example by using only materials that do not cause any sparks or high temperatures. Nevertheless, in the event of an explosion, the employer must ensure that its effects remain as limited as possible.
The Working Conditions Decree contains a transitional law to enable employers to adapt their workplaces to the new regulations. Workplaces that were already in use before 1 July 2003 must meet the provisions of the revised decree by 30 June 2006. Workplaces used after 1 July 2003, or workplaces that have been changed, extended or renovated since then, must comply directly with the new regulations. the ATEX Directive.
ATEX Directive 94/9 / EC
All new installations in explosive atmospheres must meet the requirements of the ATEX Directive 94/9/EC, which is derived from the French word “ATmosphère EXplosible”. This new directive was introduced on 1 March 1996 and became mandatory on 1 July 2003.
The most important change compared to the previous directive is that ATEX applies not only to gas explosive atmospheres but also to dust explosive atmospheres.
The different environments are subdivided into three different zones. Gas:Zone 0
1 and 2 for dust; zones 20, 21 and 22.
ATEX Directive 94/9 / EC
There are two groups:Group 1 is underground
The other areas belong to group 2
1a m1 group:mines at high risk
M2: less risky in mines
Group 2 Group 1 high risk
Group 2 risk is possible
Group 3 risk is likely to be rare
Zones according to ATEX 94/9/EC
All zones have separate ATEX certification. Gas explosion certified products cannot be used in dust explosion environments.
Zones according to ATEX 94/9/EC
Zone 0 or Zone 20: Gas or dust is present continuously More than 1000 hours a year
Zone 1 or Zone 21: Gas or dust may occasionally occur 10 – 1000 hours per year
Zone 2 or 22: Gas or dust may be present for short periods of time less than 10 hours per year
Only certain types of equipment may be used in different zones. motors may not be used in zones 0 and 20. The table above shows the various categories. All motors made of non-conductive materials must be accompanied by a certificate issued by a “Notified Body”, except for iii3D.
Zone 1 Zone 2 Zone 21 Zone 22
Ii 2g Ii 3g Ii 2d Ii 3d
ip65 non-conductive substances
EExd(e) EExd(e) ptc ip65
Electrically Conductive Substances
Principles of classification (Standard EN 50014)
I. Electrical equipment for mines
ii. Electrical equipment in other situations
iia ignition energy 200 uJ (propane)
iib ignition energy 60 uJ (ethylene)
iic ignition energy 20 uJ (hydrogen, acetylene, sulphur and carbon)
Note: IIA is in the range of IIB and IIC. iiA is ranked lower
Classification principle (standard EN 50014)
t1 ignition temperature 450°C
t2 ignition temperature 300°C
t3 ignition temperature 200°C
t4 ignition temperature 135°C
t5 ignition temperature 100°C
t6 ignition temperature 85°C
NB: T1 is in the range of T2, etc., with T1 ranked lowest. T6 is therefore the higher version.
CONQUEST®, Leading Manufacturer of ATEX Phone Explosion Proof Rugged Smartphone In China!
CONQUEST is a professional high-end intelligent and explosion-proof handheld terminal / Intrinsically Safe Smart Phone manufacturer, mainly engaged in intelligent three-proof dual-mode intercom handheld terminal, three-proof industrial explosion-proof handheld terminal, research and development, production and manufacturing of three-proof thermal image IOT handheld terminal, three-proof anti-vehicle intelligent terminal, three-proof anti-skycom satellite communication handheld terminal and other communication equipment, and global sales for global high-tech enterprises, and through ISO9000 and ISO14000 certification and chemical and coal explosion-proof certification. Services in the military, police, public safety, petrochemical, coal and minerals, air transport, railway transport, electric power, water conservancy and other industries.
CONQUEST ATEX Phone Explosion Proof Rugged Smartphone are intrinsically safe, with an emphasis on “quality and experience”, and are strictly controlled at every step of the process, from design to production. In terms of quality, all CONQUEST Rugged Mobile products undergo a rigorous testing process with high standards and quality to ensure that every user has a perfect experience. We incorporate user feedback into our product range, which now includes all models in the CONQUEST range. We sell to our customers at low prices to keep our prices competitive. Our products have been launched in the USA, Russia, Italy, Spain, UK, France, Germany, South Africa, Czech Republic, Greece, Algeria, Singapore, Malaysia, Philippines, Laos and are ready to go global.
CONQUEST ATEX Phone Explosion Proof Rugged Smartphone are available with a two-year factory warranty. We believe this is the result of our excellent products, outstanding customer service and loyal customers. Most importantly, our customers come first. We know that you value your phone, which is why we offer a truly meaningful warranty. So to our long-term customers:Thank you for your request for our products.
Why Buy ATEX Phone Explosion Proof Rugged Smartphone From Conquest?
1. Professional Customer Service – First and foremost, we are 100% customer oriented. Our goal is to help you buy the perfect intrinsically safe phone and your satisfaction is our top priority.
We do this by publishing exclusive tests, detailed product reviews, customised buying guides and by providing real sample photos from the CONQUEST manufacturer. We strive to be the world’s most advanced resource for ATEX explosion-proof handsets / intrinsically safe handsets.
2. expert advice – CONQUEST Intrinsically Safe Mobile Phone’s highly specialized industry sales professionals know the products they sell and are totally dedicated to you, our customer. Our staff will provide you with personalised guidance and trustworthy service.
3. Best Pricing – CONQUEST Intrinsically Safe Mobile Phone will follow its prices, policies and procedures. In many cases, if you buy from an unauthorised dealer (the website offering the lowest price for the phone), the manufacturer will not honour the warranty on these cameras as they cannot verify where the company got their product from. In other words, you may save some money initially, but if something goes wrong, you’re likely to get no support from the manufacturer.
4. Reliable customer service – Conquer employees understand that it is their personal responsibility to ensure your satisfaction. When you have a question or concern, each employee has the right to do whatever is necessary to answer your question or address your concern. If there is further cooperation, we will fully support our dealers.
What Is An Explosive Hazardous Area?
Explosives hazardous areas occur where flammable liquids, vapors, gases or combustible dusts are likely to occur in quantities sufficient to cause a fire or explosion. Often, these atmospheres are created where gas, vapors, dusts and liquids are in contact with oxygen. Hazardous areas are divided into zones, where the probability of a hazardous atmosphere being present governs the explosion risk. Some areas are more hazardous than others, since it is more likely that there are gasses present. There are explosive gas atmospheres, explosive dust atmospheres, and the explosive atmospheres which may exist in coal mines.
If you are looking for the industrial ATEX explosion proof phone for your projects, we highly recommend our 5G ATEX intrinsically safe model Conquest S20 ATEX & S21 ATEX for you. For more information about Conquest intrinsically safe devices please Click Here .
Safety is the highest priority
At all places where flammable substances are produced, processed, transported or stored, safety is extremely important – especially in the chemical industry, petrochemical industry, in oil and natural gas production and in mining.
In order to provide the highest level of safety possible, most countryies legislations have developed corresponding conditions in the form of laws, regulations and standards. These now have to be implemented by companies because the operator of a plant is solely responsible for safe operation in accordance with the safety law, so for the industries that work in the hazardous area, using the intrinsically safe mobile phone/ATEX explosion-proof rugged phone is a mandatory requirement,
Benefits of ATEX Phone Explosion Proof Rugged Smartphone in the Hazardous Area?
1.Provide Safe and Secure Mobile Communications
ATEX Phone Explosion Proof Rugged Smartphone/Intrinsically Safe Mobile Phone provide safe and secure mobile communications in classified or hazardous areas. You can stay connected within Class 1, Zone 1 classified hazardous areas (Zone 1/21, Zone 1, Zone 2/22). Intrinsically safe cell phones must meet specific battery design standards to achieve UL, ATEX directives, or IECEx certification for use in explosive environments.
2. Equipment Life
In manufacturing, rugged industrial handpieces play a key role in the entire value chain, from material collection, inbound and outbound logistics, procurement, demand management, order fulfillment, and manufacturing process management, to product development, commercialization, and last-mile delivery. Therefore, the first benefit of a ruggedized facility is its extremely durable and tested construction, enabling the equipment to operate under extreme climatic and operating conditions, as well as their resistance to physical shock, moisture, water, heat, and even sandstorms.
3. Inventory Management
Factory and warehouse management is essential for manufacturers. These warehouses store a variety of valuable items, parts and raw materials that can be used for a variety of manufacturing processes, machine maintenance and distribution. These along with finished goods mean keeping in an organized order and having proper accountability at all times. Did you know? rfid-based rugged devices greatly help improve inventory management by extending real-time information about goods entering and leaving the warehouse without opening boxes.
4. Maintenance machinery
The success of a manufacturing unit depends on the smooth operation of all machines to maintain the required level of efficiency in the production process. The use of industrial rugged phones has proven to be very beneficial to engineers as they allow them to seamlessly update accurate information records, share and access data in real time with managers and teams, and interact easily with customers and stakeholders. Overall, ruggedized devices improve communication, consistency, synchronization, reduced downtime, faster decision making, and increased productivity.
5. Improved process visibility
All of their work now needs to be in sync with each other, which means they need to always be told which operations need attention, which items are available, which need to be replaced or filled, which orders are waiting to be delivered, and so on. This means they need to communicate with each other at different touch points with real-time data, updates and information. Here, they take advantage of the Industrial Rugged cell phone, which allows them to communicate with each other effortlessly and instantly, and most importantly, provides complete visibility of the entire manufacturing process from start to finish.
Get Wholesale Quotation For Conquest Top ATEX Explosion Proof Cell Phone
3 Top 4G & 5G Explosion Proof ATEX Phone/Intrinsically Safe Mobile Phone Recommend
S18 IP68 grade waterproof and dustproof, 1.8 meters anti-drop, multi-functional Industrial Rugged Phone. Polycarbonate and glass fiber has the high strength and hardness, and TPU soft material has the excellent cushioning performance with no degumming and no color change
- Android 8.1, IP68 Waterproof
- Polymer 9000mAh large battery
- Rear camera 48MP + Front camera 13MP
- 3 charging methods (line charging, cradle charging, magnetic suction)
- Rigid anodized aluminum body
- Reinforced with protective rubber edges for extra protection
- Extreme shock and scratch-resistant Gorilla Glass®, glove compatible
- Strong Flashlight, Flash Lighting
- Dedicated programmable buttons (PPT keys, custom-built)
- “Dual slot DMR digital-analog intercom/analog intercom is optional
- Infrared Remote
DMR Digital/Analog Intercom
- Dual time slot data transmission
- Dual-channel/Support relay station
- 4WNVHF(136- 174MHz)/
- 350 MHzNHF(136-1 74MHz)
Corning Gorilla Glass
The glass cover is made of 5th generation Corning Gorilla explosion-proof glass, Solid and durable,scratch-resistant, and wear-resistant with a silky touch, it will get you out of the awkward feeling of using a screen protectors and giving your fingers a pleasant and silky touch.
Barcode & RFID Support
- 2D Barcode Support: PDF41 7/QR Code/Data Matrix etc
- 1DBarcode Support: Code128/UCC/EAN-128/AIM128/EAN-8/ISBN/ISSN > 5mail
- LF 125KHz/134.2KHz/HF 13.56MHz
- UHF 433MHz/UHF 91 5MHz/2.45GHz/5.8GHz
It comes with a Night vision camera with infrared illumination. Apparently in the manner of how all kinds of surveillance cameras work. Let’s highlight the surroundings and transform the result into a visible image. This function is good for the hunter or people who love camping.
The S20 5G comes with NFC (Near Field Communication) functionality. Near Field Communication (NFC) is a short-range wireless connectivity technology that makes life easier and more convenient for consumers around the world by making it simpler to make transactions, exchange digital content, and connect electronic devices with a touch. The S20 5G phone has a built-in FM radio. The built-in FM Radio is great for listening to your favorite radio station.
The Conquest S20 5G comes with Android OS v11.0 out of the box, but it is upgradable to the next OS.
- GPU Mali-G57 MP4
- OS version Android OS v11.0
- SoC Mediatek Dimensity 800 MT6873
- CPU Octa-core, Quad-core 2 GHz Cortex-A76, Quad-core 2 GHz